Mallinckrodt NPB-190 Instrukcja Operatora Pobierz pdf (Strona 69)

APPENDIX B: Data Port Protocol

Overview

Trend Data

Connecting to the Data Port

Real-Time Display Format

Patient Data and Operating Status

Nurse Call

OVERVIEW

Patient data can be obtained through the data port on the back of

the NPB-290 by connecting it to an attached PC or serial printer.

When connecting the NPB-290 to a printer or PC, verify proper

operation before clinical use. Both the NPB-290 and the printer

or PC must be connected to a grounded AC outlet.

Any printer or PC connected to the monitor’s data port must be

certified according to IEC Standard 950. All combinations of

equipment must be in compliance with IEC Standard 601-1-1

systems requirements. Anyone who connects a printer or PC to

the data output port configures a medical system and is therefore

responsible that the system complies with the requirements of

system standard IEC Standard 601-1-1 and the electromagnetic

compatibility system standard IEC Standard 601-1-2.

TREND DATA

The NPB-290 collects patient trend data for oxygen saturation,

pulse rate, and pulse amplitude. This information may be

retrieved through the NPB-290 data port or cleared using options

available in a display menu.

To access the menu options, simultaneously press the Upper and

Lower Alarm Limits buttons for at least 3 seconds, until Option 1

appears on the display. Then, using the Adjust Up and Adjust

Down buttons, you may scroll through the available menu

options, as follows:

#1: Trend Print. Prints a hard copy of the existing trend data

available.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 78 79

Brak uwag

Mallinckrodt NPB-190 Instrukcja Operatora Strona 69