Mallinckrodt NPB-190 Instrukcja Operatora Pobierz pdf (Strona 29)

Setup

WARNING: Do not use a sensor cable with the

N-395 monitor (other than the SCP-10 or MC-10 sensor

cable). Use of another sensor cable will have an adverse

effect on performance. Do not attach any cable that is

intended for computer use to the sensor port. Do not connect

any device other than a Nellcor approved sensor to the sensor

connector.

6. Plug the sensor into the SCP-10 or MC-10 sensor cable, and

secure the sensor in place by lowering the plastic sensor lock

over the sensor connector until it clicks into place (refer to

the SCP-10 or MC-10 directions for use).

7. Plug the SCP-10 or MC-10 cable into the sensor port located

on the front of the N-395.

LANGUAGE SELECTION

The languages available for display on the screen are English,

French, German, Dutch, Portuguese, Spanish, and Italian. The

N-395 is shipped with the factory default English language

displayed.

To select the appropriate language after the unit is powered on:

• press the SETUP softkey

• press the NEXT softkey

• press the LANG softkey

• Use the ADJUST UP and ADJUST DOWN Buttons to

select the desired language

• Press the EXIT button to return to the main menu.

Service personnel may set the appropriate language as the power-

on default using the procedure described in the N-395 service

manual.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 109 110

Brak uwag

Mallinckrodt NPB-190 Instrukcja Operatora Strona 29